Gloves resistant to chemical products, manufactured from a variety of materials. The manufacturers usually provide supplementary information on the resistance of the gloves to different chemical products.
Textile gloves whose partial coating gives a degree of protection against permanent contact with oil and grease. The correct size is very important for a high level of dexterity.
course 2 : the gloves - 28: translation missing: en.cours_2.slide_28.title
course 2 : the gloves - 26: translation missing: en.cours_2.slide_26.title
course 2 : the gloves - 25: Sizes of the protective gloves
Gloves conforming to the standard SN EN 407 for contact with objects up to a temperature of 100 °C
Single-use nitrile gloves. They must be replaced when they have become contaminated by the product being handled. The material of the gloves may become permeable to chemicals after a short period of contact, or it may tear.
course 2 : the gloves - 21: The permeation resistance to an identical product can vary according to the composition of the protective gloves
course 2 : the gloves - 10: Evolution of the norms and pictograms
Warning notice: It is essential to check the resistance of the gloves to specific chemicals by referring to resistance tables
Herein below we give a few guidelines for the use of gloves although we take no responsibility for these recommendations. These guidelines do not replace the analyses of physical and chemical risks at each workplace including proper evaluationof technical specifications supplied by distributors and manufacturers.